MIL-DTL-11603G(AT)
Table IX Classification of defects.
Method of
Category
Defects
examination
Critical
None
Major
101
Dimensions affecting interchangeability, out
SIE 1/and
Visual
of tolerance (see 3.2).
Minor
201
Dimensions affecting interchangeability
SIE 1/and
(see 3.2).
Visual
202
Identification marking, improper or not
SIE 1/and
legible (see 3.2.1).
Visual
203
Paint- finish coat, improper application or
Visual
color (see 3.2.5).
1/ SIE = Standard Inspection Equipment.
4.5 Verification methods. Acceptable verification methods included in this section are
visual inspection, and measurement, sample tests, full-scale demonstration tests, simulation,
modeling engineering evaluation, component properties analysis, and similarity to previously-
approved or previous-qualified designs.
4.5.1 Verification alternatives. The manufacturer may propose alternative test methods,
techniques, or equipment, including the application of statistical process control, tool control, or
cost effective sampling procedures to verify performance. See the contract for alternatives that
replace verification methods required by this specification.
4.5.2 Inspection conditions. Unless otherwise specified (see 6.2), all inspections shall be
conducted under the following conditions:
a. Air temperature: 73 +18°F (23 +10°C).
b. Barometric pressure: 28.5 (+2, - 3) in. [725 (+50, -75) mm) of mercury (Hg).
c. Relative humidity: 50 +30 percent.
4.5.3 Design, materials, and manufacturing processes. Conformance to 3.2, 3.2.1, &
3.2.5 shall be determined by inspection of contractor records providing proof or certification that
design, construction, processing, and materials conform to requirements. Applicable records shall
include drawing, specification, design data, receiving inspection records, processing and quality
control standards, vendor catalogs and certifications, industry standards test reports, and rating
data.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business