INCH-POUND
MIL-PRF-45307C(AT)
13 November 1996
SUPERSEDING
MIL-P-45307B(AT)
7 April 1989
PERFORMANCE SPECIFICATION
PUMP, HYDRAULIC, AXIAL PISTONS: MANUAL,
WITH FIRE-CONTROL SWITCH
This specification is approved for use by the U.S. Army Tank-automotive and
Armaments Command, Department of the Army, and is available for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a hydraulic pump assembly consisting of an axial
piston pump, a control handle, and a fire-control switch. The nominal displacement of the pump is
0.80 cubic inch (in.3) [13 cubic centimeters (cm3)] per revolution (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirement documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: U.S. Army Tank-automotive and
Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document, or by letter.
AMSC N/A
FSC 2520
DISTRIBUTION STATEMENT A. Approved for public release: distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business