MIL-V-62358 Valve, SolenoidThis specification covers an electrically operated solenoid valve used in the transmission to select gear range by porting oil to required control valves.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15

MIL-V-62358(AT)

If computed process average exceeds specified AQL, 100 percent inspection shall be performed and continued until such time that process average for twenty consecutive assemblies is less than the specified AQL.

6.5  Disposition of control test assemblies.  Assemblies subjected to control tests in accordance with 4.6.6.1, 4.6.7.1, 4.6.7.2, 4.6.7.3, 4.6.7.4, 4.6.7.5, 4.6.7.6.1 and 4.6.7.6.2.1 shall not be used for any other purpose and shall be indelibly, marked "DO NOT USE".

6.6  Recycled materials.  Use of recycled materials which meet the requirements of applicable material specifications without jeopardizing intended use of the item shall be encouraged (see 3.3)

6.7  Supersession data.  This specification supersedes Allison Division, General Motors

Corporation, internal specification DAX13394F, dated 15 December 1982.

Custodian:        Preparing activity: Army - AT                                                                                                Army - AT

Project No.  2520-A206

13