MIL-V-62358 Valve, SolenoidThis specification covers an electrically operated solenoid valve used in the transmission to select gear range by porting oil to required control valves.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15

MIL-V-62358(AT)

4.  QUALITY ASSURANCE PROVISIONS

4.1  Responsibility for inspection.  Unless otherwise specified in the contract or purchase order, the contractor is responsible for performance of all inspection requirements as specified herein.  Except as otherwise specified in the contract or purchase order, the contractor may use any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government.  The Government reserves the right to perform any inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.

4.1.1  Inspection equipment.  Unless otherwise specified in the contract (see 6.2), the supplier is responsible for the provision and maintenance of all inspection and test equipment necessary to assure that supplies and services conform to contract requirements.  Commercial, modified commercial, or supplier designated inspection equipment or measuring set-ups must be capable of repetitive measurements to an accuracy of 10 percent of the component tolerance.

4.1.2  Materials.  The contractor's inspection records shall be examined to determine contractor conformance to 3.3.

4.2  Classification of inspections.  The inspection requirements specified herein are classified as follows:

a.   Preproduction inspection (see 4.4.1).

b.   Initial production inspection (see 4.4.2).

c.   Quality conformance inspection (see 4.5).

4.3  Test conditions and equipment.

4.3.1  Test conditions.  Unless otherwise specified (see 6.2), all tests shall be conducted under the following conditions.

4.3.1.1  Environmental.

4.3.1.2  Electrical.

a.   Applied voltage shall be +18 to +30 volts direct current (vdc) applied to connector. b.   Solenoid valve assembly shall be mounted on a fixture with a common negative (-)

ground with the power supply.

4.3.1.3  Oil.  Oil conforming to MIL-L-2104, Grade 30 shall be used in ambient temperatures between +100F and +1200F.  Oil conforming to MIL-L-46167 shall be used in ambient temperatures between -600F and +200F.  Oil conforming to MIL-L-21260 which conforms to

MIL-L-2104, Grade 30 with 135-270 parts per million (ppm) by weight of biocide may be used as

5