MIL-PRF-46750E(AT)
3.6.1 Durability. After proper installation in specified vehicle (see 6.2), the transmission
shall be operated for distances up to 8046 kilometers (5000 miles), under conditions
commensurate with the vehicle for which transmission is being procured, and require neither
repair and nor maintenance, other than filter changes, oil changes, oil additions, and brake
adjustments.
3.6.2 Exterior surface treatment. All exposed surfaces of the transmission or components
shall be cleaned, painted or treated for corrosion resistance commensurate with the particular
material and using the best commercial practices. Unless otherwise specified (see 6.2), color of
final top coat of painted surfaces shall be white.
3.6.3 Identification and marking. Unless otherwise specified (see 6.2), all parts requiring
identification and marking shall be permanently and legibly marked and shall include as a
minimum, the model number, the serial number, the National Stock Number (NSN) and the
manufacturers name or identification (CAGE).
3.6.4 Safety. The transmission shall not produce any hazards to personnel or the
environment.
3.7 Operating environment requirements. Each transmission shall function under the
environmental conditions specified for the vehicle for which the transmission is being procured
(see 6.1).
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. First article inspection (see 4.3.1).
b. Conformance inspections (CI) (see 4.3.2).
4.2 Verification methods. The types of verification methods included in this section are
visual inspection, road tests, measurement, sample tests, full-scale demonstration tests, simulation,
modeling, engineering evaluation, component properties analysis, similarity to previously-
approved or previously-qualified designs, and by inspection of contractor records providing proof
or certification that design, construction, processing, and materials conform to requirements.
Applicable records shall include drawings, specifications, design data, receiving inspection
records, processing and quality control standards, industry standards, test reports, and rating data.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business