INCH-POUND
MIL-DTL-62461E(AT)
1 December 1998
SUPERSEDING
MIL-PRF-62461D(AT)
11 April 1997
DETAIL SPECIFICATION
TRANSMISSION ASSEMBLY
This specification is approved for use by U.S. Army Tank-automotive and Armaments
Command, Department of the Army, and is available for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a transmission with an integral torque converter that
consists of the main assembly and a control valve. The transmission assembly will be referred to,
herein, by the term `transmission'. The transmission is a counter-shaft type with external clutches
and a six-speed self-contained unit with the necessary gearing, shafting, spacers, bearings and all
other parts required for satisfactory operation (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirement documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: U.S. Army Tank-automotive and
Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document, or by letter.
AMSC N/A
FSC 2520
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business