MIL-DTL-62099D(AT)
4.3.4 TV lever closed-stop adjustment check. To determine conformance to 3.3.5, at
completion of the automatic shift test, the input power supply shall be stopped. From the TV
lever position established for the "at detent" position, the TV adjustment screw and nut shall be
positioned and locked.
4.3.5 "Full-On" TV lever position - automatic range upshift tests. To determine
conformance to 3.3.6, the following test shall be performed:
a. Place the range selector lever in the 1-3 position and the TV lever in the "full-on"
position with no dynamometer load on the output shaft.
b. Increase the input speed.
c. By adjustment of the TV lever and output load, allow the transmission to upshift
"l-2" and "2-3".
d. Determine that shifts do not occur before specified minimum input speeds.
4.3.6 Drive range load test. To determine conformance to 3.3.7, the following test shall
be performed:
a. Place the TV lever in the full-on position.
b. Increase the output shaft load to produce a "3-2" and "2-1" automatic range
downshift.
c. Determine the output speed at which the automatic "2-1" downshift occurs.
4.3.7 Drive range converter stall test. To determine conformance to 3.3.8, the following
test shall be performed:
a. Stall the output shaft with the dynamometer.
b. Place the range selector shift lever in the "1-3" range position and the TV lever in
the "full-on" position.
c. Increase the input speed until input torque is within the limits of 240 to 260 lb-ft.
d. Determine the input speed and output torque in accordance with table III.
4.3.8 Shift inhibitor test.
4.3.8.1 "3-2" shift inhibitor test. To determine conformance to 3.3.9, the following test
shall be performed:
a. With the transmission in "1-3" position and no TV, disconnect transmission output
shaft from absorption dynamometer and adjust the engine throttle to obtain
approximately 3000 rpm input speed. Check that lockup clutch is engaged.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business